Vintage Hot Strat
Real 60's Vintage Strat Tone
$105 – $315
Make your Stratocaster sound like a Strat should with Lindy Fralin’s Vintage Hots. As our best-selling Stratocaster set, Vintage Hots offer the purest vintage Strat tone. Vintage Hots have a warm, balanced midrange with lots of sparkle and clarity on the top, guaranteeing you’ll stand out in the mix. If you’re looking for the purest Stratocaster tone, look no further than these pickups right here!
Quick Links
Jump to Sound Clips and more Info:
Share This Product
Share this product with others and spread the love!
Fralin Vintage Hots: Real Vintage Strat Tone.
Want to learn more about our Vintage Hot Strat? Here's all the information you'll need:
Features
Vintage Hot Pickups: our best-selling single coil set. If you’re looking for a sparkling, bright, and open sound, you will love these pickups’ tone. Vintage Hots give you a balanced 50’s Tone: a smooth balance between bright and fat. They fit in the middle sonically of our Real 54’s and Blues Specials.
These pickups are era-authentic: wound with USA-made 42-gauge Formvar-enameled wire and built with USA-made AlNiCo V magnets. These pickups sound smooth, balanced, and beautiful.
Features:
- Modified Vintage Fender specifications, with clean Strat pickups with modern output
- Bright, clean tone with balance across lows and highs – real vintage-sounding Strat pickups
- USA-made Alnico 5 Magnets for optimal tonal balance and output
- RW/RP Middle for Hum-Cancelling in Positions 2 & 4
- Two magnet staggers available for different fingerboard radiuses
- Hand-wound with our “Sectioning” technique for unique, dynamic tone
- Hand-built fiberboard Bobbins for unrivaled quality control
- 10-Year Warranty on manufacturing defects
- 6K Neck & Middle, 6.6K Bridge
SOUND
Vintage Hots feature a vintage Strat pickup sound – they sparkle and sound very open and clear without sounding “tinny” or glassy. These pickups sound big and full, with an even balance of Bass, Middle, and Treble, clean or dirty. The tone cuts through with distortion – while remaining very dynamic and thick.
Expect a precise low-end and an acute attack. Single notes cut through with ease, while chords have an excellent string-to-string definition.
Our manufacturing process allows us to achieve unparalleled quality control. Our Vintage Hots consist of locally-stamped fiberboard and USA-Made Alnico 5 Magnets.
We wind each pickup by hand, one at a time. We wind each pickup using our proprietary “Sectioning” technique. Our Sectioning Technique gives the pickup a sweet, bright tone. Finally, we wax-pot the pickup to preserve the pickup and prevent microphonics.
Sound Samples for Vintage Hot Strat:
About this Sound Clip:
All sound samples are played from Neck Position First and Bridge Position Last.
Tonal Graph For Vintage Hot Strat:
The tonal graph below for our Vintage Hot Strat features Lows, Midrange, Highs, and general Output.
Attack: Bright & Sharp
Videos for Vintage Hot Strat:
Tech Specs:
See below for the estimated DCR and Polarity Information for our Vintage Hot Strat.
| SPECIFICATION | VALUE |
|---|---|
| Neck Ohm Reading: | 6K 1 |
| Middle Ohm Reading: | 6K 1 |
| Bridge Ohm Reading: | 6.6K 1 |
| Neck & Bridge Polarity: | Clockwise Coil Direction, South to Strings |
| Reverse Middle Polarity: | Counter-Clockwise Coil Direction, North to Strings |
| Recommended Pot Value: | 250K |
| Magnet: | USA-Made Alnico 5 |
| Recommended Cap Value: | 0.02mfd 2 |
Additional Technical Info:
1 Ohm Readings can vary due to a multitude of factors, including ambient temperature, multimeter calibration, different wire batches, and other factors. Due to this, ohm readings are approximate. Learn more about Ohm Readings here.
2 We recommend a 0.02mfd Cap Value on most guitar and bass pickups. The exception is a Magic Cap, which Lindy prefers on the Bridge Pickup of Fender® guitars only. Learn More about Caps Here.
Polarity Information:
Here's how we wind and magnetize our pickups:
Note: We depict all our coil directions from Ground (Black Wire, or Start Wire) to Hot (White Wire, or Finish Wire).
Vintage Hot Strat Dimensions:
Our Strat® replacements are standard Stratocaster sizing and spacing. All string spacings are 52mm.
Vintage Hot Strat FAQ's
General FAQs
Here are quick answers to common questions we get:
-
What Ohm Readings does your Vintage Hot Strat have?
Navigate to our Tech Specs Tab for complete Ohm Readings and more useful information.
-
Will this pickup fit my instrument?
Check our "Sizing" tab for the size of the pickup. No Sizing tab? Check under the product image gallery for dimensions.
-
Is your Lead Time of 1 Week accurate?
It depends on the shop capacity at the moment, and the size of your order. Feel free to give us a call for an accurate lead time. We always try to beat our estimated Lead Times.
-
What pickup height do you recommend setting your Vintage Hot Strats to?
Our recommended Pickup Height is 1/8" (3.175mm) on the Bass Side and 1/16"( 1.5875mm) on the Treble Side. To measure, hold the correct side down at its highest fret. Then, measure from the bottom of the string to the top of the pole piece.
Product FAQ's
People frequently ask these questions about our Vintage Hot Strat. If you have a question that you don't see listed here, click "Ask" in the Quick Links section above.
-
What's the tonal difference between this pickup and the Real '54s?
The Real ’54s use Alnico 3 magnets. These magnets create a softer, spongier sound. They also add a bit more glassiness compared to the Vintage Hots. The Vintage Hots feature a more modern attack and a bit more bottom-end.
Pickup Pairing
Our Vintage Hot Strat pairs well with the following models:
Vintage Hot Tele - Set
Starting At: $ 120
Pair a Middle with a Vintage Hot Tele Set for the ultimate in Nashville Tele Twang.
View ProductGet It Prewired
Get our Vintage Hot Strat prewired into a Prewired Pickguard!:
Featured Reviews
Reviews We Worked Hard For, and Are Proud Of
There are no reviews yet.
Be the first to review “Vintage Hot Strat”
Leave a review for our Vintage Hot Strat
