Blender Pot

Simply Powerful.

$12

  • Simple
  • Fun!
  • Easy-Installation

Lindy Fralin Original Design

( 26 genuine reviews)

The Fralin Blender Pot gives you the ability to blend your Neck and Bridge Pickups, as well as get all 3 on single-coil guitars. This is a great product for those who love to “tinker” with wiring, like Lindy! It takes the place of your Tone Pot and connects directly to the guitar’s switch. Turning the pot blends in pickups – if you’re on the Bridge, it will blend in the Neck, and vice versa. It’s, simple, affordable, and powerful!

Available! Estimated Lead Time: 2-3 Days

Sleeve

Include a Sleeve to convert your Blender Pot to a Solid Shaft Pot.

Notice

Due to the nature of Raw Nickel, Raw Nickel may contain slight cosemetic defects or abrasions.

Recommendation:

We recommend using 2-Conductor With Shield Lead when purchasing a single pickup. 2-Conductor lead allows you to reverse the phase should you have phase issues. Learn About Lead Choice

Note:
Upgrade To A Prewired Pickguard

Blender Pot Info:

Want to learn more about our Blender Pot? Here's all the information you'll need:

Features

One of our favorite and most powerful mods, the Fralin Blender Pot is an easy way to blend your Neck and Bridge pickups to achieve new tones. Achieve Telecaster tones on a Fender Strat by blending the Neck and Bridge together. Blend all 3 pickups together by choosing either position 2 or 4 and playing with the pot. It installs easily by replacing your tone pot 2 (closest to output jack).

With this mod, you can get seven tones out of a Strat – it’s a game changing modification you can perform in 15 minutes.

You can also use this mod to gradually tap a humbucker, and more. Check out our Wiring Diagrams page for some useful modifications, or just search “Blender Pot” in the search bar for a wide range of ideas you can use, today.

This version only works on Strat and Tele installations. It features a 1/4″ bushing, suitable for pickguard and control plate installations only. For Archtop / Les Paul installations, check out our Push-Pull Version.

How The Blender Pot Works

It’s a very simple operation:

  1. With the Blender Pot on “10”, Select your Bridge pickup.
  2. Turning the pot to “0” gradually blends in your Neck pickup.
  3. Select the Neck Pickup, and repeat the process.
  4. Have fun finding tones that you can use!

 

What’s Included

This version ships pre-wired with cloth leads and hardware – a washer and hex nut. This Split-Shaft pot can also convert to a Solid Shaft pot using an optional Sleeve.

Installation

Lindy Fralin Blender Pot Installation

Installation Note

Follow the instructions here to wire it up in a Standard Fender Stratocaster, utilizing a Master Tone.

Tech Specs:

SPECIFICATION VALUE
Value:250K*
Taper:Audio Taper
Direction:Counter-clockwise**
Bushing Length:1/4"

Additional Technical Info:


*Value doesn't matter when installed as a Blender Pot | **Turning Blender Pot Down rolls in opposite pickup

Customer Reviews

26 Genuine Reviews for Blender Pot

  1. David Pajo

    Verified Purchase

    So easy to set up instead of the broadcaster/double Esquire blend wiring! Make sure your pickups are the correct polarity / wind direction for phase and you are golden.

  2. Chris Dyas

    Verified Purchase

    Unlike most strat players I play in the bridge pickup most of the time. My guitar is on the dark side tonally and I play a surf style so it works for me. Although I mostly use my strat at gigs, for recordings I also use a jazzmaster in the middle position with both pickups on. Just installed the blender pot and I can finally make those jazzmaster songs work on a strat live! Couldn’t be happier, what a great new sound out of a guitar I’ve been gigging with for 14 years. If you’re looking to get those tele or jazzmaster middle position sounds the blender is a no-brainer. Works and sounds far better than I expected, thanks Lindy!

  3. Scott Macleod

    Verified Purchase

    Your blender pot is a quick and easy mod on all my customers Strats. Adding the 2 extra pickup possibilities is an eye opener for all Strat players especially. Homerun!! Great quality part as well!!

  4. Rick Baughman

    Verified Purchase

    The blender pot is a great mod for my Strats. I can retain the character of the bridge pickup but smooth the bite a bit by blending in a little of the neck pickup. Likewise, I can brighten up the neck pickup by adding a little bridge. And having both pickups on full adds another cool tone. It’s an easy mod to wire, so it’s a no brainer.

Add a review

Leave a review for our Blender Pot

Your email address will not be published. Required fields are marked *