Steel Pole 43 Strat
Aggressive P90 Tone For Strat®
$115 – $345
Instantly transform your Strat into the P90 powerhouse of your dreams with Lindy Fralin’s Steel Pole 43s. Featuring a high-output coil design and an aggressive magnet structure, this is as close to the famous P90 tone as we can get on a Strat. Don’t be afraid to get dirty – experience the expertly-crafted blend of P90 and Strat pickups, and discover what you’ve been missing.
Quick Links
Jump to Sound Clips and more Info:
Supercharge your Strat's Tone.
Want to learn more about our Steel Pole 43 Strat? Here's all the information you'll need:
Features
Are you suffering from a wimpy Strat tone? We have the cure: Our Steel Pole 43 Strat Pickups are the highest-output Strat pickups we make and have the most volume and thickness. Lindy’s Steel Pole 43 leans towards the tone of a traditional P90, only in a Strat size. So, if you’re looking for the perfect P90 tone out of your Strat, look no further! We wind this model with 43-gauge wire for maximum volume and feature ceramic bar magnets for an aggressive attack.
Our Steel Pole 43s are beefier than the Blues Specials and Steel Pole 42’s, and they sound best with 500K pots.
Features:
- Original Fender Size, Lindy Fralin Design
- Strong and bold – lots of midrange and snarl
- USA-made Ceramic Magnets for aggressive tone and output
- Compensated Bridge for even volume across all pickups
- RW/RP Middle pickup for hum-canceling on positions 2 & 4
- Adjustable Steel Pole pieces for fine-tuning string balance
- Hand-wound with our “Sectioning” technique for unique, dynamic tone
- Hand-built for unrivaled quality control
- Backed by our 10-Year Warranty on manufacturing defects
- 8.3K Neck & Middle, 10K Bridge
Our manufacturing process allows us to achieve unparalleled quality control. Steel Pole Pickups consist of a precision injection mold and USA-Made Steel Screws. We use aggressive USA-Made magnets to make this model scream. Each bobbin is carefully inspected and cleaned before winding.
We wind each pickup by hand, one at a time. We wind each pickup using our proprietary “Sectioning” technique. This gives the pickup a sweet, clear tone. Finally, we wax-pot the pickup to preserve the pickup and prevent microphonics.
Sound
Steel Pole 43’s sound more like a P90 than traditional Strat pickups. They have a light compression that allows the pickup to break up quicker. This model sounds thicker in the midrange with more of a “chainsaw” grind, not like Alnico. They will hit the front-end of your amp hard and break up quickly. You’ll notice more midrange, especially in the lows and highs, when played clean. The midrange is prominent on this pickup, and it sounds excellent on 500K pots.
Finally, Steel Pole 43 Pickups are for those who need the most output out of their Strat. If you’re looking for something different, these may be right for you. Also, if your current pickups are too bright or thin, you will love these. These tend to be thicker sounding and very aggressive.
Sound Samples for Steel Pole 43 Strat:
About this Sound Clip:
All sound samples are played from Neck Position First and Bridge Position Last.
Tonal Graph For Steel Pole 43 Strat:
The tonal graph below for our Steel Pole 43 Strat features Lows, Midrange, Highs, and general Output.
Attack: Stiff & Percussive
Tech Specs:
See below for the estimated DCR and Polarity Information for our Steel Pole 43 Strat.
| SPECIFICATION | VALUE |
|---|---|
| Neck Ohm Reading: | 8.3K 1 |
| Middle Ohm Reading: | 8.3K 1 |
| Bridge Ohm Reading: | 10K 1 |
| Neck & Bridge Polarity: | Clockwise Coil Direction, South To Strings |
| Reverse Middle Polarity: | Counter-Clockwise Coil Direction, North To Strings |
| Magnet: | Ceramic |
| Wire: | USA-Made 43-Gauge Single Poly Nylon |
| Recommended Pot Value: | 500K |
| Recommended Cap Value: | 0.02mfd 2 |
Additional Technical Info:
1 Ohm Readings can vary due to a multitude of factors, including ambient temperature, multimeter calibration, different wire batches, and other factors. Due to this, ohm readings are approximate. Learn more about Ohm Readings here.
2 We recommend a 0.02mfd Cap Value on most guitar and bass pickups. The exception is a Magic Cap, which Lindy prefers on the Bridge Pickup of Fender® guitars only. Learn More about Caps Here.
Polarity Information:
Here's how we wind and magnetize our pickups:
Note: We depict all our coil directions from Ground (Black Wire, or Start Wire) to Hot (White Wire, or Finish Wire).
Steel Pole 43 Strat Dimensions:
Our Strat® replacements are standard Stratocaster sizing and spacing. All string spacings are 52mm.
Steel Pole 43 Strat FAQ's
General FAQs
Here are quick answers to common questions we get:
-
What Ohm Readings does your Steel Pole 43 Strat have?
Navigate to our Tech Specs Tab for complete Ohm Readings and more useful information.
-
Will this pickup fit my instrument?
Check our "Sizing" tab for the size of the pickup. No Sizing tab? Check under the product image gallery for dimensions.
-
Is your Lead Time of 1 Week accurate?
It depends on the shop capacity at the moment, and the size of your order. Feel free to give us a call for an accurate lead time. We always try to beat our estimated Lead Times.
-
What pickup height do you recommend setting your Steel Pole 43 Strats to?
Our recommended Pickup Height is 1/8" (3.175mm) on the Bass Side and 1/16"( 1.5875mm) on the Treble Side. To measure, hold the correct side down at its highest fret. Then, measure from the bottom of the string to the top of the pole piece.
Product FAQ's
People frequently ask these questions about our Steel Pole 43 Strat. If you have a question that you don't see listed here, click "Ask" in the Quick Links section above.
-
Are the pole pieces adjustable?
Yes – the pole pieces are designed to fine-tune your string balance.
-
What tonal difference does the Steel Pole Pieces make?
It gives this pickup a stiffer treble. It doesn’t have the Fender “Sparkle” like traditional Fender Pickups and is close to a P90.
-
What's the difference between this pickup and the Steel Pole 42?
This pickup sounds much closer to a P90 and requires 500K pots. The Steel Pole 42 sounds closer to a traditional Fender pickup and sounds best on 250K pots.
Pickup Pairing
Our Steel Pole 43 Strat pairs well with the following models:
Steel Pole 43 Tele - Set
Starting At: $ 130
Add a reverse middle to your Steel Pole 43 Nashville Tele Set for a screaming P90-voiced Telecaster!
View Product
P90 - Humbucker - Bridge
Starting At: $ 150
HSS Strat? Make it a P90 powerhouse with a P90 Bridge.
View Product
High Output Strat - Neck & Middle
Starting At: $ 105
Put a Steel Pole 43 Bridge with a High Output Neck & Middle for a versatile, powerful Strat
View ProductGet It Prewired
Get our Steel Pole 43 Strat prewired into a Prewired Pickguard!:
Featured Reviews
Reviews We Worked Hard For, and Are Proud Of
Customer Reviews
22 Genuine Reviews for Steel Pole 43 Strat
-
The experience was great, your online information was very helpful and the call from your support people to help me feel confident about the install. The pickup sounded great, just what I was looking for. I am planning my next pickup purchase now, this time humbuckers. Thank you so much.
-
I put a SP 43 pickup in a strat body with Blues Specials in the neck & middle. I thought it sounded really good but I still wanted something a little different so I got SP 43’s for the neck and middle positions, changed the pots to 500K and the tone cap to .02mfd and I’m very happy with the result. I’ve always played through tube amps, usually a Vibrolux Reverb or 5e3, so my observations are based on those, but there’s nothing that I would do differently with this guitar, it sounds great for my needs.
Add a review
Leave a review for our Steel Pole 43 Strat
